Focus and Scope

Mapta Journal of Mechanical and Industrial Engineering (MJMIE) welcomes contributions which promote the exchange of ideas and rational discourse between practicing educators and mechanical and industrial engineering researchers all over the world. The MJMIE is dedicated to advancing the boundary of knowledge and technology by encouraging cross-disciplinary research and innovative applications in major mechanical and industrial engineering projects. The journal is published biannually and covers a wide variety of topics including (but not limited to):

Mechanical Science fields:

1.Mechanical design
2.Structural analysis
3.Dynamical analyses
5.Transient analysis
6.Material science
7.Composite materials
9.Maintenance of mechanical systems
13.Biomedical engineering
14.Thermal analyses
17.Mechanical machinery
18.Agricultural machinery
19.Fluid mechanics
21.Heat transfer
22.The production and usage of heat and mechanical power
23.Heating and cooling systems
24.Medical devices
25.Transport phenomena
26.Physics science

Industrial Science fields:

1.Operations management
2.Management science
3.Operations research
4.Systems engineering
5.Manufacturing engineering
6.Ergonomics or human factors engineering
7.Safety engineering
8.Motives of the user
9.Health management engineers
10.Health systems engineers
11.Quality control


Section Policies

Research Articles
  • Checked Open Submissions
  • Checked Indexed
  • Checked Peer Reviewed
Review Articles
  • Checked Open Submissions
  • Checked Indexed
  • Checked Peer Reviewed
Technical Note
  • Checked Open Submissions
  • Checked Indexed
  • Checked Peer Reviewed
  • Checked Open Submissions
  • Checked Indexed
  • Checked Peer Reviewed


Open Access Policy

This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge. Everyone has a right to "download, reuse, re-print, modify, distribute and/or copy" the published papers.



This journal utilizes the LOCKSS system to create a distributed archiving system among participating libraries and permits those libraries to create permanent archives of the journal for purposes of preservation and restoration.


Indexing, Abstracting and Membership

  • Checked Creative Commons
  • Checked Open Access
  • Checked Google Scholar
  • Checked ResearchBib
  • Checked Directory of Research Journals Indexing
  • Checked CNKI Scholar
  • Checked Cite Factore (Academic Scientific Journals)
  • Checked J-Gate
  • Checked WorldCat


Publication Ethics

The ethical policy of Mapta Journal of Mechanical and Industrial Engineering (MJMIE) is based on the Committee on Publication Ethics (COPE) guidelines and complies with International Committee of MJMIE Editorial Board codes of conduct. Readers, authors, reviewers and editors should follow these ethical policies once working with MJMIE The ethical policy of MJMIE is liable to determine which of the typical research papers or articles submitted to the journal should be published in the concerned issue. For information on this matter in publishing and ethical guidelines please visit

Authors are responsible for the originality of manuscripts submitted to Mapta Journal of Mechanical and Industrial Engineering (MJMIE) and the original data based on which the manuscript is provided must be available upon on editor request. Authors are responsible for the contents of their manuscript, including article claims, conclusions, and appropriate citation, acknowledgments, and author contribution.

Authors of Mapta Journal of Mechanical and Industrial Engineering must confirm the following:

  • Checked Submitted manuscripts must be the original work of the author(s)
  • Checked Only unpublished manuscripts should be submitted
  • Checked It is unethical to submit a manuscript to more than one journal concurrently
  • Checked Any conflict of interest must be clearly stated
  • Checked Acknowledge the sources of data used in the development of the manuscript
  • Checked All errors discovered in the manuscript after submission must be swiftly communicated to the Editor

Principles of Transparency and Publication Ethics

Peer review process: MJMIE is a double-blind peer-reviewed electronic monthly publication concerned with all aspects of Mechanical and Industrial Engineering. This process, as well as any policies related to the journal’s peer review procedures, is clearly described on the journal’s Web site (

Governing Body: MJMIE has a very strong editorial board, whose members are recognized experts in the subject areas included within the journal’s scope. The full names and affiliations of the journal’s editors are provided on the journal’s Web site (

Identification of and dealing with allegations of research misconduct: Editor-in-Chief takes reasonable steps to identify and prevent the publication of papers where research misconduct has occurred, including plagiarism, citation manipulation, and data falsification/fabrication, among others.

Website: A journal’s Website ( contains that care has been taken to ensure high ethical and professional standards.

Contact information: Journal is provided the contact information for the editorial office of MJMIE (

Name of journal: The Journal name of Mapta Journal of Mechanical and Industrial Engineering (MJMIE) has unique and not be one that is easily confused with another journal.

Conflicts of interest: Authors are requested to evident whether impending conflicts do or do not exist while submitting their articles to MJMIE through Conflict of Interest Disclosure form (

Declaration of Competing Interests: The editor must not be involved in decisions about manuscripts which authors has written him/herself or have been written by family members, colleagues or which relate to products or services in which the editor has an interest. Further, any such submission must be subject to all of the journal’s usual procedures, peer review must be handled independently of the relevant author/editor and their research groups, and there must be a clear statement to this effect on any paper that is published.

Acknowledgments: All contributors who do not meet the criteria for authorship should be listed in an "Acknowledgements" section. Examples of those who might be acknowledged include a person who provided purely technical help or writing assistance or a department chair who provided only general support.

Disclosure of Funding Sources: MJMIE authors are required to declare what support they received to carry out their research. Declaring funding sources acknowledges funders’ contributions, fulfills funding requirements and promotes greater transparency in the research process.

Duties and Responsibilities of Editors

  • The Editors of the journal should have the full authority to reject/accept a manuscript.
  • The Editors of the journal should maintain the confidentiality of submitted manuscripts under review or until they are published.
  • The Editor-in-Chief should take a decision on submitted manuscripts, whether to be published or not with other editors and reviewers
  • The Editors of the journal should preserve the anonymity of reviewers.
  • The Editors of the journal should disclose and try to avoid any conflict of interest.
  • The Editors of the journal should maintain academic integrity and strive to meet the needs of readers and authors.
  • The Editors of the journal should be willing to investigate plagiarism and fraudulent data issues and willing to publish corrections, clarifications, retractions, and apologies when needed.
  • The Editors of the journal should have the limit themselves only to the intellectual content.
  • The Editors of the journal must not disclose any information about submitted manuscripts to anyone other than the corresponding author, reviewers, potential reviewers, other editorial advisers, and the publisher, as appropriate.
  • Unpublished materials disclosed in a submitted paper will not be used by the editor or the members of the editorial board for their own research purposes without the author's explicit written consent.
  • Guest editors play a vital role in acquiring content and leading the review process for special issue publications.


Duties and Responsibilities of Reviewers

  • The Reviewers of the journal should assist the Editors in taking the decision for publishing the submitted manuscripts.
  • The Reviewers should maintain the confidentiality of manuscripts, which they are invited to review.
  • The Reviewers should provide comments in time that will help editors to make a decision on the submitted manuscript to be published or not.
  • The Reviewers are bound to treat the manuscript received for peer reviewing as confidential, and must not use the information obtained through peer review for personal advantage.
  • The Reviewers comments against each invited manuscript should be technical, professional and objective.
  • The Reviewers should not review the manuscripts in which they have found conflicts of interest with any of the authors, companies, or institutions.
  • The Reviewers should disclose and try to avoid any conflict of interest.


Authors of Mapta Journal of Mechanical and Industrial Engineering must confirm the following:

  • Submitted manuscripts must be the original work of the author(s);
  • The submitting corresponding author is responsible for ensuring that the manuscript article's publication has been approved by all the other coauthors;
  • Only unpublished manuscripts should be submitted;
  • All authors have agreed to allow the corresponding author to serve as the correspondent with the editorial office, to review the edited manuscript and proof;
  • Acknowledge the sources of data used in the development of the manuscript;
  • All listed authors must have made a significant scientific contribution to the research in the manuscript and approved all its claims;
  • All errors discovered in the manuscript after submission must be swiftly communicated to the Editor;
  • All authors must know that that the submitted manuscripts under review or published with MJMIE are subject to screening using Plagiarism Prevention Software. Plagiarism is a serious violation of publication ethics.



Plagiarism includes, but is not limited to:

  • Checked Directly copying text from other sources without attribution
  • Checked Copying ideas, images, or data from other sources without attribution
  • Checked Reusing text from your own previous publications without attribution or agreement of the editor (Exception: Reusing text from the Methods section in the author’s previous publications, with attribution to the source, is acceptable.
  • Checked Using an idea from another source with slightly modified language without attribution

If plagiarism is detected during the peer review process, the manuscript may be rejected. If plagiarism is detected after publication, we may issue a correction or retract the paper, as appropriate. Mapta Journal of Mechanical and Industrial Engineering use "iThenticate" software to detect plagiarism.


Data fabrication 

This concerns the making up of research findings


Data falsification 

Manipulating research data with the intention of giving a false impression. This includes manipulating images (e.g. micrographs, gels, radiological images), removing outliers or “inconvenient” results, changing, adding or omitting data points, etc.


Duplicate submissions

Duplicate submission is a situation whereby an author submits the same or similar manuscripts to two different journals at the same time either within Academic Journals or any other publisher. This includes the submission of manuscripts derived from the same data in such a manner that there are no substantial differences in the manuscripts. Duplicate submission also includes the submission of the same/similar manuscript in different languages to different journals.


Errata and Corrigenda

Changes/additions to accepted articles

All content of published articles is subject to the editorial review process, organized by and under the auspices of the editor. Should the authors wish to add to their article after acceptance, they must submit a request to the editor and the new content will be reviewed.

  • Checked If the new material is added to the accepted article, it must be submitted for peer review as a new manuscript, referring back to the original.
  • Checked If the new material should replace the original content of the accepted article, the editor may consider the publication of an erratum or a corrigendum.


An erratum refers to a correction of errors introduced to the article by the publisher.
All publisher-introduced changes are highlighted to the author at the proof stage and any errors are ideally identified by the author and corrected by the publisher before final publication.


A corrigendum refers to a change to their article that the author wishes to publish at any time after acceptance. Authors should contact the editor of the journal, who will determine the impact of the change and decide on the appropriate course of action.


Complaints Policy

We aim to respond to and resolve all complaints quickly and constructively. The procedures to investigate and resolve complaints followed by MJMIE aims to be fair and balanced for those making complaints and for those being complained about. The complaint can be made by writing an email. Please email to:
All complaints will be acknowledged within one week.


Peer Review Process

All published articles in Mapta Journal of Mechanical and Industrial Engineering (MJMIE) must be passed through peer review process. This journal uses double-blind peer-review, which means that the reviewers of the paper won’t get to know the identity of the author(s), and the author(s) won’t get to know the identity of the reviewer. The idea is that everyone should get a similar and unbiased review.

Reviewers’ Responsibilities


If MJMIE’s Editor has invited you to review a manuscript, please consider the following items:

  • Reviewing manuscript critically but constructively and preparing detailed comments about the manuscript to help authors improve their research;
  • Reviewing multiple versions of a manuscript as necessary;
  • Providing all required information within established deadlines;
  • Making recommendations to the editor regarding the suitability of the manuscript for publication in the journal;
  • Declaring to the editor any potential conflicts of interest with respect to the authors or the content of a manuscript they are asked to review;
  • Reporting possible research misconducts;
  • Suggesting alternative reviewers in case they cannot review the manuscript for any reasons;
  • Treating the manuscript as a confidential document;
  • Not making any use of the work described in the manuscript;
  • Not communicating directly with authors, if somehow they identify the authors;
  • Not identifying themselves to authors;
  • Not passing on the assigned manuscript to another reviewer;
  • Ensuring that the manuscript is of high quality and original research;
  • Informing the editor if he/she finds the assigned manuscript is under consideration in any other publication to his/her knowledge;
  • Writing a review report in English only;
  • Authoring a commentary for publication related to the reviewed manuscript.

What should be checked while reviewing a manuscript?

  • Novelty;
  • Originality;
  • Scientific reliability;
  • A valuable contribution to science;
  • Adding new aspects to the existed field of study;
  • Ethical aspects;
  • Structure of the article submitted and its relevance to authors’ guidelines;
  • References provided to substantiate the content;
  • Grammar, punctuation, and spelling;
  • Scientific misconduct.

The detailed Journal peer review process is based on the following chart:



Publication Frequency

The journal is published biannually.


Author fees

This journal charges the following author fees.
Article Processing Charges (APC): 50.00 (GPB)
Mapta Journal of Mechanical and Industrial Engineering (MJMIE) is an "Open Access" journal, which is freely available to the reader. There are still costs associated with the publication and production of such journals; thus, authors have to pay Article Processing Charge (APC). If this paper is accepted for publication, you will be asked to pay an Article Publication Charge to cover publication costs.
MJMIE offers APC waivers to papers whose corresponding authors are based in countries classified by the World Bank as low and middle-income economies as of July 2020. The corresponding author should submit a waiver request to the journal when payment is requested, after acceptance of the manuscript.
Article Submission Charges for the Mapta Journal of Mechanical and Industrial Engineering is free.


Journal Sponsership


Mapta Publishing Group founded in 2017 is an international platform for Scientists, Professors, Engineers and students involved in all streams of research in engineering sciences to publish high quality research and review papers. Mapta Publishing Group is functioning as an excellent research paper publisher with a global reputation for quality journals.

Sources of Support

Revenue sources of the Mapta Journal of Mechanical and Industrial Engineering have been providing by author fees.


Publishing System

This journal uses Open Journal Systems, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License.